Battery Charger

Product Details:

24v 40a Battery ChargerEstablished in the year 2002, we, “Maitry Instruments & Control” have emerged as a reliable manufacturer and supplier of a qualitative range of Process Control Instruments & Automation Components.

Product Details:

Output Voltage= 24V
Current = 05A
Mounting = Wall Mounting
Dimension = 170*110*60

Product Details:

Specification

• Input Voltage 150-300 V AC
• Output voltage
• Float Mode 13.4 V DC
• Boost Mode 13.9 to 14 V DC
• Inrush Current Limited by NTC Thermister
• Charging current in boost mode 10 amps
• Charging current in float mode 0 to 4 amps
• Operating Temperature 0 TO 50 DEG C
• Leakage current <2 mA at 230 vac
• Vibration 10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
• Protections
• Input under voltage Cutoff level 140 VAC. Turn on voltage 160 VAC
• Input over voltage 300 V AC units shuts off if voltage goes above this value
• Output over voltage (Batt charger included) 15.5 V DC
• Output short circuit and overload Continuously protected
• Battery reverse polarity Protected latching mode
• Current drawn by charger from battery Draws zero current from the battery under any circumstances
• Externally Induced Over voltage Protected against output overvoltage caused by parallel connection of alternator etc
• Annunciation Potential free NO /NC contact for charger On/ Fail indication
• Indication Mains On, Float, Boost, and Battery Reverse
• Line Regulation <1%
• Load regulation <1%
• Ripple and noise 150 mv p-p
• Isolation between Input & Output 2000V AC
• Input & Earth 1500V AC
• Output & Earth 1500V AC
• Dimensions L*B*H 170*110*85mm
• Mounting Wall mounting type
• Weight 1200 gms

With Fan / Without Fan Available

Product Details:

Specification

• Input Voltage 150-300 V AC
• Output voltage
• Float Mode 13.4 V DC
• Boost Mode 13.9 to 14 V DC
• Inrush Current Limited by NTC Thermister
• Charging current in boost mode 10 amps
• Charging current in float mode 0 to 4 amps
• Operating Temperature 0 TO 50 DEG C
• Leakage current <2 mA at 230 vac
• Vibration 10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
• Protections
• Input under voltage Cutoff level 140 VAC. Turn on voltage 160 VAC
• Input over voltage 300 V AC units shuts off if voltage goes above this value
• Output over voltage (Batt charger included) 15.5 V DC
• Output short circuit and overload Continuously protected
• Battery reverse polarity Protected latching mode
• Current drawn by charger from battery Draws zero current from the battery under any circumstances
• Externally Induced Over voltage Protected against output overvoltage caused by parallel connection of alternator etc
• Annunciation Potential free NO /NC contact for charger On/ Fail indication
• Indication Mains On, Float, Boost, and Battery Reverse
• Line Regulation <1%
• Load regulation <1%
• Ripple and noise 150 mv p-p
• Isolation between Input & Output 2000V AC
• Input & Earth 1500V AC
• Output & Earth 1500V AC
• Dimensions L*B*H 170*110*85mm
• Mounting Wall mounting type
• Weight 1200 gms

With Fan / Without Fan Available